The EPS(TM) TT interface has two separate cable inputs for use both with Bar End levers and brake lever controls. This ultra-light component may be installed on either the brake cables or the handlebar mount. If only using either bar end controls or brake lever controls than please choose the standard EPS interface. Riding Settings: The client can adjust the reference position of the rear derailleur and/or derailleur using the adjustment procedure known as Riding Setting. The adjustment of the rear derailleur is designed especially in case you change the wheel for one with a set of sprockets that are positioned differently with respect to the drop out. Every time either keys 2 or 3 are pressed, the system performs a set displacement of 0.25mm if you act on the rear derailleur, and approximately 0.1mm if you act on the front derailleur. When you have completed the adjustment phase, the system will correct the established positions of all chainrings based on the new settings. Digital Tech Intelligence (DTi): The DTi is housed inside the Power Unit and continuously monitors the signals that arrive from all the EPS components, thus managing their operation. The main functions of the DTI are to control and manage the battery pack, enable and monitor both derailleurs, signal any faults through the RGB LED, communicate with the interface, and activate the acoustic buzzer….
– Campagnolo EPS Athena TT Interface Groupsets & Build-kits – £168.94 (RRP – £)
